Custom-built cedar and chain-link gate solutions for homes and businesses throughout Arvada and nearby communities.
Fence Gate Repair & Installation in Arvada
A gate should open smoothly, close securely, and remain properly aligned. Arvada Handyman repairs, replaces, and installs residential and commercial fence gates, including walk-through gates, double driveway gates, cedar gates, and chain-link gates. We address sagging, rot, storm damage, broken hinges, faulty latches, and unstable posts. Our custom cedar gates are built on-site with proper diagonal bracing for a strong fit, dependable operation, and a clean appearance.
Licensed & Insured
Colorado General Contractor
Danish–American Standards
Best of both worlds
Google Reviews
5-star rated in Arvada
Small, Personal & Experienced
2 techs · 1 assistant
Whether you need a small hardware repair or a complete gate replacement, we provide straightforward recommendations based on the condition of the gate, posts, and surrounding fence. Our goal is to restore safe, convenient access without replacing more of your fence than necessary. Contact Arvada Handyman to request an estimate for your residential or commercial gate project.
✔ Custom cedar walk-through gate installation
✔ Double driveway gate installation and replacement
✔ Chain-link gate repair and installation
✔ Sagging gate alignment and adjustment
✔ Hinge, latch, and gate hardware replacement
Custom Fence Gate Services for Your Property
Fence Gate Repairs, Replacements, and New Installations
Fence gates receive more movement and stress than almost any other part of a fence. Daily opening and closing, strong winds, changing temperatures, moisture, soil movement, and worn hardware can gradually pull a gate out of alignment. A gate that once operated easily may begin dragging across the ground, leaning away from the latch, or becoming difficult to close.
Arvada Handyman provides fence gate repair, replacement, and installation for residential and commercial properties. We work on cedar and chain-link gates, including standard walk-through entrances and wider double gates used for driveways, equipment access, and commercial areas.
Not every damaged gate needs to be completely replaced. A gate with a good frame and solid posts may only need new hinges, a replacement latch, or careful realignment. When the wood is rotted, the frame is badly twisted, or previous construction lacks proper support, replacement may provide a more dependable result.
We inspect the entire gate system before making a recommendation. That includes the gate frame, pickets, hinges, latch, posts, and the opening between the posts. This allows us to identify the actual source of the problem instead of making a temporary adjustment that fails again shortly afterward.
Our recommendations are honest and practical. In most situations, we focus on repairing or replacing the gate itself while leaving the surrounding fence in place. Additional work is recommended only when nearby posts or fence components are no longer structurally sound.
Custom Cedar Gates Built On-Site for a Better Fit
A fence opening is not always perfectly square or built to a standard size. Posts can shift, fences can settle, and older gates may have been built without enough clearance or structural support. For these reasons, Arvada Handyman builds cedar gates on-site to fit the actual opening instead of relying on a generic, preassembled gate.
Our process begins by removing the old gate when replacement is needed. We then measure the distance between the posts and check both posts for sturdiness. A strong gate cannot perform correctly when it is attached to a loose, leaning, or rotted post. If a supporting post is no longer dependable, we recommend replacing it before installing the new gate.
Once the opening and posts are ready, we construct a new cedar frame with properly positioned crossmembers. Diagonal bracing is added to help keep the gate square and reduce the likelihood of sagging. The direction and placement of this brace matter because it helps transfer the weight of the gate back toward the lower hinge area.
After building the frame, we attach it securely to the supporting post, install the cedar pickets, and add the latch and necessary hardware. We check the clearances around the gate and confirm that it swings freely, closes correctly, and meets the latch without being forced.
Building the gate at the property allows us to account for the actual conditions of the fence. The finished gate can be sized to match the opening, aligned with the surrounding fence, and constructed for its intended use. This attention to fit is especially important for older fences, unusual openings, sloped yards, and gates that have experienced recurring alignment problems.
For homeowners who like the warm color of new cedar, the gate should eventually be stained or sealed by a qualified provider. Arvada Handyman does not provide staining or sealing. Cedar that remains untreated will naturally weather to a gray color over time. This does not necessarily mean the gate has failed; many homeowners prefer the natural weathered appearance.
Fixing Sagging Gates, Damaged Hardware, and Unstable Posts
Sagging is one of the most common fence gate problems. It can happen when the frame lacks proper diagonal support, the hinges loosen, the wood begins to deteriorate, or the supporting post moves under the gate’s weight. Simply lifting the gate and tightening a few screws may provide temporary relief, but the problem is likely to return if the underlying cause is not corrected.
We begin by examining how the gate is hanging and where it is making contact. A sagging gate may drag across concrete, soil, gravel, or landscaping. It may also strike the latch post, leave an uneven gap, or require the owner to lift it before closing. We check the frame, hinges, fasteners, latch position, and supporting posts to determine whether an adjustment, hardware repair, structural repair, or replacement is the right solution.
Broken hinges and faulty latches are also common. Exterior hardware is exposed to moisture, weather, repeated movement, and the weight of the gate. Hinges can bend, pull away from the wood, or become loose. Latches may no longer line up correctly, making the gate difficult to secure. Replacing worn hardware and correcting the alignment can often restore normal operation when the rest of the gate remains in good condition.
Rot and storm damage can require more extensive work. Cedar is well suited to exterior use, but prolonged exposure, poor drainage, and damaged surfaces can weaken a gate over time. Strong winds can twist a gate, damage hinges, or loosen posts. When the gate frame is no longer structurally dependable, replacing the gate is usually more effective than repeatedly repairing individual components.
The condition of the posts is especially important. Fence posts support the gate’s weight and resist the forces created each time it opens and closes. If a post is rotted, loose, or leaning, we recommend replacing it before attaching a new gate. Installing a well-built gate on a weak post would compromise the entire project.
Walk-Through, Driveway, and Chain-Link Gate Solutions
Different gates serve different purposes, so the construction and hardware should match how the opening will be used. A backyard walk-through gate may provide everyday access for family members, pets, trash bins, and lawn equipment. A double driveway gate may need to create a wider opening for vehicles, trailers, commercial equipment, or deliveries. Chain-link gates often provide a practical solution for utility areas, side yards, businesses, and properties where visibility is preferred.
Arvada Handyman installs and repairs cedar walk-through gates for residential and commercial properties. Each new wood gate is measured and built on-site so the frame fits the existing opening. We use proper crossmembers and diagonal bracing to improve stability and help the gate stay square.
For wider openings, we can work on double driveway gates. These systems require careful alignment because both gate panels must meet properly in the center while maintaining adequate clearance from the ground. The supporting posts must also be strong enough to carry the added width and weight. We evaluate the opening, posts, hinges, and closing hardware before recommending repair or replacement.
We also repair and install chain-link gates. Common chain-link gate problems include bent frames, damaged hinges, loose fittings, alignment issues, and latches that no longer connect properly. Depending on the condition of the components, the gate may be adjusted, repaired, rehung, or replaced.
The right solution depends on more than appearance. We consider the width of the opening, frequency of use, condition of the posts, surrounding fence material, ground clearance, and the level of access or security the property requires. Our goal is to provide a gate that works reliably and looks appropriate with the existing fence.
Whether the project involves a cedar backyard gate, a chain-link entrance, or a double gate for a commercial property, you can expect clear communication throughout the work. We explain what we find, recommend only the repairs that make sense, and focus on dependable craftsmanship rather than temporary fixes.
How It Works
4 simple steps to get your home painted
Provide a detailed description and photos of the work needed. The more you share, the faster we can send you an accurate estimate.
We'll email you an estimate after reviewing your info. Ask any questions — once you accept, we get to work.
We schedule a time that works for you. If something extra comes up on-site, we quote and often fix it right away!
When the work is done, we always clean up after ourselves so you can enjoy your home again without any hassle.
Fence Gate Services in Arvada and Nearby Communities
Monday - Friday: 9 am - 5 pm, Weekends: Closed.
20 minutes from Arvada, which includes: Westminster, Leyden, Golden Gate Canyon, Golden, Wheat Ridge, Lakeside, Edgewater, and more.
Arvada Handyman provides fence gate repair and installation within approximately 20 minutes of Arvada. Our service area includes Arvada, Westminster, Wheat Ridge, Golden, Edgewater, Lakeside, Leyden, Golden Gate Canyon, and nearby communities.
Properties throughout this area have many different fence styles and ages. Some homes have older cedar privacy fences with gates that have gradually sagged as the wood and posts have aged. Others have chain-link fencing around side yards, utility areas, rental properties, or commercial spaces. Newer properties may need an additional walk-through gate or a wider entrance for landscaping equipment, trailers, or vehicles.
Colorado weather can place substantial stress on outdoor gates. Strong sunlight, dry conditions, snow, moisture, wind, and temperature changes can affect wood, posts, fasteners, and exterior hardware. Gates are especially vulnerable because they move regularly and place continuous leverage on their hinges and supporting posts.
We help local property owners solve common problems such as gates that drag, no longer line up with the latch, swing open unexpectedly, or have been damaged during a storm. We also replace rotted cedar gates, install new chain-link gates, and build custom gates for openings that do not accommodate a standard product.
Our work is available for residential and commercial properties. Whether you need a backyard gate that keeps pets safely contained, a dependable side-yard entrance, or a wider double gate for equipment access, we will evaluate the opening and recommend an appropriate solution.
Contact Arvada Handyman with photos and a description of your gate project. We will review the information, answer your questions, and provide a clear estimate for the recommended work.
FAQ
Can a sagging fence gate be repaired?
Many sagging gates can be repaired when the frame, wood, and supporting posts remain in serviceable condition. The solution may involve adjusting or replacing the hinges, correcting the latch position, adding structural support, or realigning the gate. When the frame is badly twisted, rotted, or improperly constructed, replacement may be more dependable. We inspect the gate and posts before recommending the best option.
Do you build custom cedar fence gates?
Yes. We build cedar gates on-site to fit the opening between the existing fence posts. This is helpful because older fence openings are not always perfectly square or built to standard dimensions. We construct the frame with appropriate crossmembers and diagonal bracing, attach it to a sturdy post, install the cedar pickets, and finish the gate with suitable hinges and a latch.
Do you install and repair chain-link gates?
Yes. We repair and install chain-link gates for residential and commercial properties. Depending on the condition of the gate, repairs may include correcting alignment, replacing hinges or latch components, tightening fittings, or addressing a damaged frame. When the existing gate is no longer dependable, we can install a replacement that fits the opening and works with the surrounding chain-link fence.
What happens if the fence posts are loose or rotted?
A gate should not be installed on a post that is loose, leaning, or rotted. The post supports the gate’s weight and keeps the hinges properly aligned. Attaching a new gate to an unstable post can cause immediate alignment problems and premature sagging. When a supporting post is no longer structurally sound, we recommend replacing it before installing or rehanging the gate.
Should a new cedar gate be stained or sealed?
Staining or sealing can help preserve the warmer color of new cedar. Arvada Handyman does not provide staining or sealing services, so that work would need to be completed separately. When cedar is left untreated, it naturally weathers to a gray color over time. Homeowners who like the weathered appearance may choose to leave it untreated, while those who prefer the fresh cedar color should arrange for an appropriate protective finish.
Can you replace only the gate instead of the entire fence?
In most cases, yes. We generally focus on repairing or replacing only the gate as long as the surrounding fence and supporting posts are in good condition. Replacing an entire fence section is usually unnecessary when the problem is limited to the gate or its hardware. If we find a loose or rotted post, we will recommend replacing that post so the repaired or new gate has a dependable foundation.